• 0257-2270121 / 23
  • info@bluegem.in

PRIME DICORE (EXTERIOR / INTERIOR WALL PRIMER)

PRIME DICORE (EXTERIOR / INTERIOR WALL PRIMER) :

Exterior / Interior Wall Primer Bluegem wall primer is suitable for exterior use. It does not require curing and is a mandatory part of the Exterior / Interior painting system.

Premium Paint with Nano Technology for EXTERIOR /INTERIOR USE PRIMER

COMPOSITION :

PRIME DICOR EXTERIOR/ INTERIOR is water based acrylic paint PRIMER which can be applied directly on plaster wall and gives eye catching finish.

Features & Benefits :

Eco Friendly : Does not require primer coating which is mainly made up of cut back solvents. This makes it more user friendly as applicator does not have to inhale solvent vapors. Also helps in saving carbon foot prints.

Weather Guard : PRIME DICOR provides enhanced protection against alkali an UV degradation thereby providing anti-fading property and making the paint long lasting

Anti-algal : PRIME DICOR provides excellent resistance to growth of algae and fungi on the wall. This prevents appearance of black spots on wall due to algal growth

COVREGE AREA :

ENERIOR PRIMER 40 sq.ft.
1ST COAT PER LTR
INTERIR PRIMER 50 sq.ft
1ST COAT PER LTR
**Actual coverage may vary from the quoted coverage due to factors such as method and condition fo application and surface roughness and porosity.


PRECAUTIONS :

  • Do not apply when ambient temperature is less than 10o C or if the temperature might drop to this level within 4 hrs of application
  • Tint using PRIME DICOR ENT/ITN Paint machine colorants only
  • Stir well before use. Material to be used within 24 hours of opening
  • Do not apply on surface which are subject to continual seepage/dampness

APPLICATION STEPS :

Pre-Application : Newly made surface to be cured completely. We recommend 30 days of curing time before Appling CERAFIX Wall Putty For existing surface, it should be free from any earlier paint coat, dust etc Growth of microbes to be removed with wire brush and water.
All cracks recommended to be filled with CERAFIX Gap Filler
Holes and dents to be filled using CERAFIX Wall Putty


SAFETY FEATURES :

  • Please refer to MSDS of PRIME DICOR PRIMER Coat which gives detailed information on safety precautions to be taken, which is available on request
  • Keep the container tightly closed when not in use
  • Keep out of reach of children and pests
  • Harmful if ingested. Seek medical attention immediately under such situation
  • Application to be done with proper eye protection. In case of contact with eyes, splash immediately with lots of water and seek medical advice
  • Avoid dust inhalation by wearing proper nose pad during sanding and surface preparation to avoid inhalation of Dust
  • Do not dispose leftover paint in drain or water courses
  • In case of spillage, contain using sand
  • No added Lead, Mercury or Chromium compounds.

DIRECTIONS FOR USE :

Cleaning : Ensure that the surface to be painted, is free from any loose paint, dust or grease. Any previous growth of fungus, algae or moss need to be removed thoroughly by vigorous wire brushing and cleaning with water.

Filling : Surface imperfections such as holes, dents, fine cracks are to be filled with wall putty or a mixture of white cement and fine sand.

Putty : (optional) Smoothen surface by filling dents with thin coats of wall putty. Allow it to dry for 4-6hrs. sand with emery paper. Wipe clean.

Primer : If putty has been used apply a coat of primer to avoid a patchy appearance. Allow it to dry for 3-4 hrs. Sand with emery paper 320 before application of topcoat.

TECHNICAL DETAILS :

  • Drying time : 15-20 minutes
  • Sheen Level : 2.9 at 85o C
  • Flash Point : NA
  • Stability : to be used within 24 hours

PACKING - Available in convenient packing size of 1 ltr, 4ltr, 10 ltr, 20 ltr.