LEAKLOCK PU2K WATER PROOFING SOLUTION
Leaklock PU2K is Bluegem's unique innovation derived from polyurethane based two-component waterproofing system with anti-corrosion coat. It consist of grey color liquid that can be easily applied by brush.
Clean the concrete surface by removing mud, dust and extraneous substances like Oil, Lubricant and old coating with the help of a wire brush. The concrete must be free from moisture and completely dry. Stir the contents well before mixing.
Components A : 81 part by weight
Components B : 19 part by weight
Take the Content of Components B and pour into the relevant container of component A (which are weighted in right mixing proportion). Mix the components throughly with a road. Apply the mixture on the prepared surface using a good quality paint brush. Composition can be diluted with solvent LLD to adjust application with viscosity. The mixed solution must be cosumed with in 45 minutes. Allow the first coat to dry for 2-4 hours. Roughen the surface slightly with an emery paper prior to applying the second coat – Apply the second coat and allow in to cure for 24 hours. Dispose of the empty containers immediately after use with due care.
|Appearance||Grey Color liquid|
|Mix Ratio (Polyol Part - A : Hardener Part - B||81:19 (Part of weight)|
|Pot life at 300C||Approx 45 Min|
|Coverage||25 to 30 Sq. Ft. / Kg. Double Coat*|
|Application Temperature||Room Temperature|
|Packing||1/2 Kg. , 1 Kg, 4 Kg.|
*Depend on Surface
|LEAK LOCK PU2K W.P||TRADITIONAL BRICKS BED W.P|
|Instant Application - Minimum Time consumption||Long process and time consuming|
|Nominal Load i.e. 50g/sq.ft. hence safe Sweet Home||Heavy Load i.e. 10kg./sq.ft.|
|Low cost, 100% value for money||Expenssive, Time consuming hence Costly|
|Guaranteed Leakages protection||Average Performance Seepage & leakage problems may occure|
|Waterproofing an Anti-Corrosive agent||Only Waterproofing|