• 0257-2270121 / 23
  • info@bluegem.in

CERAFIXBOND (BLOCK JOINING ADHESIVE)

CERAFIXBOND (BLOCK JOINING ADHESIVE) :

GREEN BUILDING
BLUEGEM group has been coined to green building offer CerafixBond is a high quality premixed (Morter) adhesive through state of the art mixing machinery.

Features & Benefits :

Why waste precious natural resources... When you can get stronger joints with CERAFIXBOND ?

CERAFIXBOND is a high strength adhesive for quick and firm laying of AAC, CLC and Precast Blocks with thin joints.

Being a quality conscious organization. We are exporting a superior range of products. These products work are widely used by our clients are well developed products. Research facilities as well as services of experienced team also allow us to deliver. These in formulation effectiveness as demanded by the customers

CERAFIXBOND is unique bonding adhesive for AAC, CLC, PRECAST unit. It is design give taking of strength, stability, durability and economics. It enables good bond in horizontal and vertical joints. CERAFIXBOND is light weight and curing less product. It is best replacement for conventional mortar.

USAGE & PREPARATION INSTRUCTION :

Wet the surface before applying Cerafixbond, take a bag 40 kg to and add 12 - 14 liters of clean water. Mix it thoroughly using the stirrer, then it is ready to apply. Apply uniformly layer of 2-3 mm of CERAFIXBOND on blocks.

PACKING & STORE :

Available in 40 kg (hdpe bag) Material colour : White and Gray, Store in Dry covered shade.

PACKING - 40 kg

TECHNICAL SPECIFICATION :

High Bond Strength : (3.4 Mpa) can get stronger joint within thickness of 2-3 mm layers.

No Shrinkage Crack : Water is retained in mortar thus prevents shrinkage and crack.

Premixed : No required blending, only add clean water.

Economical : Cerafixbond required for laying blocks is 3 time less than conventional mortar.

Coverage : 200 to 225 sq.ft. with thickness 3mm bed (for 4 inches thick AAC block)

Zero Wastage : It is eazy to apply and avoides wastage of material.

No Curing Required : Due to water retention polymers, curing is not essential after application.

Properties Specification
Appearance Grey Powder
Water Required 30 % to 35%
Pot Life ~ 1.5 - 2 hrs.
Curing Not Required
Tensile Adhesive Strength 34. Mpa (as per ASTM C1660)
Coverage 200-225 Sq.ft. For 4" Thick Block